Greenlogy TEC® Grating

Greenlogy TEC® Grating and Industrial Products & Services - Molded Grating, FRP, Steel Grating and Automation Support

How to Select Greenlogy TEC® Molded Grating for Your Application

Greenlogy TEC® molded grating is available in various resin configurations and over twenty panel sizes and surface options. Selection can be evaluated from three aspects: service environment, load requirements and installation method.

  • Choose resin system based on corrosive media: common resin configurations handle different acid and alkali environments. For highly corrosive or high-temperature conditions, please contact us to confirm suitability.
  • Choose grating depth and mesh size based on load and support conditions: 1/2" deep grating is lightweight, suitable for applications sensitive to self-weight with moderate loads; for larger spans, evaluate support spacing.
  • Choose surface type based on slip resistance needs: in wet or oily environments, grating with anti-slip grit surface can improve walking safety.
  • Choose cutting and fastening method based on installation scenario: grating is easy to fabricate on site and can be secured with standard fasteners; allow clearance for thermal expansion and contraction.

If you are unsure about the specific configuration, please provide your operating parameters and we will assist you with selection.

Greenlogy TEC® Product & Service Overview

Greenlogy TEC® offers not only molded grating but also a range of industrial products and technical services to meet diverse project requirements.

FRP / Fiberglass Products

Molded grating, pultruded profiles, handrails, walkways, platforms, stair treads and accessories, lightweight and corrosion-resistant for various industrial environments.

Steel Grating & Wire Rope Products

Steel grating and wire rope products are available for applications requiring higher load capacity.

Industrial Technical Services

Including DCS control systems, industrial software (ERP / CRM) and website engineering, supporting factory automation and digitalization.

For more product details or technical support, please contact us.

Frequently Asked Questions

What industrial and civil applications is Greenlogy TEC® molded grating suitable for?

Greenlogy TEC® molded grating is widely used for screens, machine guards, fencing, dividers and cages, and also works as anti-slip flooring in wet or slippery conditions. It can also provide a cost-effective protective walkway for roofs or filter tanks to prevent surface damage during equipment inspection or maintenance.

How do I choose the resin system for Greenlogy TEC® molded grating based on corrosive environment?

Common resin configurations handle different acid and alkali environments, so selection should start by identifying the type and concentration of the corrosive media. For highly corrosive or high-temperature conditions, please contact Greenlogy TEC® to confirm suitability and avoid choosing a resin system that may not meet the service life requirements.

What load and support conditions should I consider when choosing grating depth and mesh size?

1/2-inch deep grating is lightweight and suitable for applications sensitive to self-weight with moderate loads. For larger spans, you need to evaluate the support spacing to ensure the grating does not deflect excessively under load.

How does Greenlogy TEC® grating improve slip resistance in wet or oily environments?

For wet or oily environments, Greenlogy TEC® grating with an anti-slip grit surface can be selected to increase surface friction and improve walking safety. If you have specific slip resistance requirements, please provide operating details so we can recommend a suitable surface type.

What should I pay attention to for cutting and fastening Greenlogy TEC® molded grating during on-site installation?

Greenlogy TEC® molded grating is easy to fabricate on site and can be secured with standard fasteners. During installation, it is recommended to allow clearance for thermal expansion and contraction to prevent deformation or damage caused by temperature changes.

If I am unsure about the specific configuration, how can I get selection support from Greenlogy TEC®?

If you are unsure about the specific configuration, please provide your operating parameters such as service environment, load requirements and installation method, and Greenlogy TEC® will assist you with selection. You can also contact us via the website www.niteck.com for technical support.

Greenlogy TEC ® GRATING

Overview         Shop

FRP grating panels and pultruded fiberglass profiles displayed for industrial walkway and platform use

Greenlogy TEC ® Grating Advantages 

  • Lightweight  

  • Corrosion Resistant 

  • Easily Fabricated 

  • Long Service Life 

Greenlogy TEC s a 1/2" deep purpose, lightweight grating that can be used for a wide range of applications including screens, machinery guards, fencing, dividers and cages. Greenlogy TEC, when fully supported, can be used as slip resistant flooring where wet or slippery conditions exist. It can also provide a cost-effective, protective walkway for rooftops and trickling filter media to prevent surface damage when personnel are inspecting and servicing equipment. 

Greenlogy TEC  molded gratings are designed to provide the ultimate in reliable performance, even in the most demanding conditions. Greenlogy TEC offers the widest selection in the market with multiple resins and more than twenty grating configurations available in many panel sizes and surfaces.