FRP Solutions for Food & Beverage

FRP Solutions for Food and Beverage: Platforms, Walkways, Gratings, Stair Treads, Handrails and Profiles

Key Points for Selecting FRP in Food and Beverage Facilities

FRP Products and Services for Food and Beverage

For food and beverage facilities, FRP selection covers platforms, walkways and gratings in wet, frequently washed areas. Greenlogy TEC supplies molded gratings, pultruded profiles, handrails and stair treads, with selection support based on your plant layout.

Molded Gratings and Covers

Molded gratings are corrosion resistant and do not readily absorb water. Grating covers and accessories work with them to balance drainage and slip resistance in frequently washed areas.

Pultruded Profiles, Platforms and Walkways

Pultruded profiles are used for platforms, walkways and support structures. Support spacing can be set around equipment foundations, drains and piping to reduce on-site rework.

Handrails, Stair Treads and Technical Services

Handrails, stair treads and accessories use the same material system as the main structure for easier maintenance and replacement. Greenlogy TEC also provides DCS and industrial software services.

To discuss materials and specifications for your specific plant layout, contact Greenlogy TEC via www.niteck.com.

Food and beverage production areas are often wet, frequently washed down and may come into contact with cleaning agents. Ordinary metal materials tend to corrode, while ordinary flooring can become slippery. FRP (fiberglass reinforced plastic) is corrosion resistant, does not readily absorb water, and its slip resistance can be adjusted through surface treatment, making it suitable for platforms, walkways, gratings, stair treads and handrails in mixing lines, packaging areas and docks. Greenlogy TEC supplies molded gratings, pultruded profiles, handrails, walkways, platforms, stair treads, grating covers and accessories, helping contractors and plant owners standardize material selection across different areas.

Choose grating type and anti-slip surface according to the humidity and cleaning method in each area, avoiding surfaces with higher slip risk in frequently washed zones.

  • Determine support spacing for platforms and walkways based on equipment foundations, drainage channels and piping layout to reduce on-site rework.
  • In docks and loading areas that may carry forklift or trolley loads, select grating and profile specifications with matching load capacity.
  • Handrails, stair treads and accessories should use the same material system as the main structure for easier future maintenance and replacement.
  • To discuss materials and specifications for your specific workshop layout, please contact Greenlogy TEC via the official website www.niteck.com.

Food&Beverage

Frequently Asked Questions

Why is FRP grating and walkway material often chosen for food and beverage plants?

Food and beverage production areas are often wet, frequently washed down, and may come into contact with cleaning agents; ordinary metals tend to corrode and ordinary flooring can become slippery. FRP is corrosion resistant and does not readily absorb water, and its slip resistance can be adjusted through surface treatment. This makes it suitable for platforms, walkways, gratings, stair treads and handrails in these

How should I select the grating type and anti-slip surface in frequently washed areas?

Choose the grating type and anti-slip surface according to the humidity and cleaning method of each area, and avoid surfaces with higher slip risk in frequently washed zones. Contractors and plant owners can standardize material selection by area so that selection criteria remain consistent across different workshops.

Do the FRP solutions for the food and beverage industry comply with FDA and USDA standards?

Greenlogy TEC's food and beverage FRP products are designed to meet FDA and USDA standards. They can be used in facilities such as mixing lines, packaging areas and docks, addressing the material requirements of these cleaning-intensive and wet environments.

How should support spacing for platforms and walkways be determined to reduce on-site rework?

Support spacing for platforms and walkways should be determined based on equipment foundations, drainage channels and piping layout, which helps reduce on-site rework. Incorporating these factors into design coordination early helps the grating and profiles fit with existing facilities during installation.

How should grating and profiles be selected in docks and loading areas that carry forklift or trolley loads?

In docks and loading areas that may carry forklift or trolley loads, select grating and profile specifications with matching load capacity. Selection should take the actual loading conditions of the area into account, and specific specifications can be discussed with the supplier.

Why is it recommended that handrails, stair treads and accessories use the same material system as the main structure?

Handrails, stair treads and accessories should use the same material system as the main structure for easier future maintenance and replacement. To discuss materials and specifications for a specific workshop layout, contact Greenlogy TEC through the official website www.niteck.com.


With a consistently wet environment and harsh cleaning products, the food and beverage industry needs unique solutions to their corrosion and slip hazard problems. Greenlogy products are designed to meet FDA and USDA criteria and can be used throughout these facilities from mixing lines, to packaging, to docks.