简体中文
English
GB/T 1446-2005
Official source
Greenlogy TEC Engineering Tools · References Greenlogy TEC · References
FRP Grating Standards: 12 Countries & ISO
Organized by country and by theme: 12 countries and regions plus ISO international standards. National standards are grouped by country, ISO standards form their own group, and the rest are arranged by application theme. Public documents open directly; licensed documents link to the publisher; uploaded PDFs can be downloaded after signing in.
12 countries and regions
ISO standards
Nine topics
Public downloads
Official sources
Sign-in PDFs
Reference library · grouped by country and theme
Standards and compliance references
National and regional standards are grouped by country, international standards have their own group, and the rest are organized by application theme. Each card shows its language and access mode. “Public download” opens the free full text; “View at official source” opens the publisher's page; a licensed PDF marked “Available” requires sign-in, and its link expires after 30 minutes.
122 documents 60 national standards 10 international standards 15 public downloads
Filter by category
Showing 122 of 122 documents
National and regional standards
Grating, access-platform, structural-load, fire and FRP test standards from 12 countries and regions, grouped by market.
China
10GB/GB/T test methods for FRP mechanical properties, resin content and reaction to fire; grating design itself references GB 50608 and GB/T 31539 in the structural group.
GB/T 1447-2005
Official source
Fibre-Reinforced Plastics — Determination of Tensile Properties
GB/T 1448-2005
Official source
Fibre-Reinforced Plastics — Determination of Compressive Properties
GB/T 1449-2005
Official source
Fibre-Reinforced Plastics — Determination of Flexural Properties
GB/T 1451-2005
Official source
Fibre-Reinforced Plastics — Charpy Impact Test
GB/T 2577-2005
Official source
Glass Fibre Reinforced Plastics — Determination of Resin Content
GB/T 3854-2017
Official source
Reinforced Plastics — Barcol Hardness Test
GB/T 2408-2021
Official source
Plastics — Determination of Burning Behaviour — Horizontal and Vertical Methods
GB/T 2406.2-2009
Official source
Plastics — Determination of Burning Behaviour by Oxygen Index — Part 2: Room-Temperature Test
GB/T 8323.2-2008
Official source
Plastics — Smoke Generation — Part 2: Determination of Optical Density by the Single Chamber Method
United States
8ASTM methods for short-beam shear, compression, water absorption, fibre content and burning behaviour used in US grating specifications.
ASTM D2344/D2344M-22
Official source
Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates
ASTM D695-23
Official source
Standard Test Method for Compressive Properties of Rigid Plastics
ASTM D570-22
Official source
Standard Test Method for Water Absorption of Plastics
ASTM D648-18
Official source
Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
ASTM D2584-18
Official source
Standard Test Method for Ignition Loss of Cured Reinforced Resins
ASTM D3171-22
Official source
Standard Test Methods for Constituent Content of Composite Materials
ASTM D635-22
Official source
Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position
ASTM D2863-23e1
Official source
Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Burning of Plastics (Oxygen Index)
Europe (EN)
6EN standards for pultruded profiles, slip resistance, reaction to fire and imposed loads on buildings.
EN 16165:2021
Official source
Determination of Slip Resistance of Pedestrian Surfaces — Test Methods
EN 124-1:2015
Official source
Gully Tops and Manhole Tops for Vehicular and Pedestrian Areas — Part 1: Definitions, Classification, General Principles of Design, Performance Requirements and Test Methods
EN 1433:2002+A1:2008
Official source
Drainage Channels for Vehicular and Pedestrian Areas — Classification, Design and Testing Requirements, Marking and Evaluation of Conformity
EN ISO 9239-1:2010
Official source
Reaction to Fire Tests for Floorings — Part 1: Determination of the Burning Behaviour Using a Radiant Heat Source
EN 1991-1-1:2002
Official source
Eurocode 1: Actions on Structures — Part 1-1: General Actions — Densities, Self-Weight and Imposed Loads for Buildings
EN ISO 14122-2:2016
Official source
Safety of Machinery — Permanent Means of Access to Machinery — Part 2: Working Platforms and Walkways
United Kingdom
5BS 4592 flooring, stair treads and handrails, supported by the BS 476 fire tests.
BS 4592-0:2006+A1:2012
Official source
Flooring, Stair Treads and Handrails for Industrial Use — Part 0: Common Design Requirements and Recommendations for Installation
BS 4592-4:2006
Official source
Flooring, Stair Treads and Handrails for Industrial Use — Part 4: Specification for Glass Reinforced Plastics Flooring
BS 4592-6:2008
Official source
Flooring, Stair Treads and Handrails for Industrial Use — Part 6: Specification for Glass Reinforced Plastics Stair Treads
BS 476-6:1989+A1:2009
Official source
Fire Tests on Building Materials and Structures — Part 6: Method of Test for Fire Propagation for Products
BS 476-7:1997
Official source
Fire Tests on Building Materials and Structures — Part 7: Method of Test to Determine the Classification of the Surface Spread of Flame of Products
Japan
5JIS test methods for GFRP tensile, flexural and compressive properties and oxygen-index burning behaviour.
JIS K 7015:2013
Official source
Fibre-Reinforced Plastic Composites — Determination of Flexural Properties
JIS K 7054:1995
Official source
Testing Method for Tensile Properties of Glass Fibre Reinforced Plastics
JIS K 7055:1995
Official source
Testing Method for Flexural Properties of Glass Fibre Reinforced Plastics
JIS K 7056:1995
Official source
Testing Method for Compressive Properties of Glass Fibre Reinforced Plastics
JIS K 7201-2:2021
Official source
Plastics — Determination of Burning Behaviour by Oxygen Index — Part 2: Ambient-Temperature Test
Korea
4KS test methods for GFRP mechanical properties and the Korean adoption of ISO 14125.
KS M 3380:2022
Official source
Glass Fibre Reinforced Plastics — Determination of Flexural Properties
KS M 3381:2009
Official source
Glass Fibre Reinforced Plastics — Determination of Tensile Properties
KS M 3382:2009
Official source
Glass Fibre Reinforced Plastics — Determination of Compressive Properties
KS M ISO 14125-2012(2022)
Official source
Fibre-Reinforced Plastic Composites — Determination of Flexural Properties
India
3Indian imposed-load and FRP material standards. India has no dedicated FRP grating product standard; specifications are written around IS 875 loads and FRP material tests.
IS 6746:1994
Official source
Unsaturated Polyester Resin Systems for Low Pressure Fibre Reinforced Plastics — Specification
IS 875 (Part 2):1987 (R2018)
Official source
Code of Practice for Design Loads (Other than Earthquake) for Buildings and Structures — Part 2: Imposed Loads
IS 18256:2023
Official source
Fibre Reinforced Polymer (FRP) Bars for Internal Reinforcement of Concrete Structures — Specification
Australia and New Zealand
4AS/NZS access platforms, access covers and grates, slip resistance and combustibility.
AS 1657:2018
Official source
Fixed Platforms, Walkways, Stairways and Ladders — Design, Construction and Installation
AS 3996:2019 (Amd 2:2022)
Official source
Access Covers and Grates
AS 4586:2013
Official source
Slip Resistance Classification of New Pedestrian Surface Materials
AS 1530.1-1994
Official source
Methods for Fire Tests on Building Materials, Components and Structures — Part 1: Combustibility Test for Materials
Canada
4CSA FRP material and structural design standards, with ULC surface-burning and non-combustibility tests.
CSA S807:19 (R2024)
Official source
Specification for Fibre-Reinforced Polymers
CSA S806:26
Official source
Design and Construction of Building Structures with Fibre-Reinforced Polymers
CAN/ULC 102:2019 (R2024)
Official source
Standard Method of Test for Surface Burning Characteristics of Building Materials and Assemblies
CAN/ULC 114:2018 (R2024)
Official source
Standard Methods of Fire Tests for the Non-Combustibility of Building Materials
Russia and CIS
5GOST standards for polymer-composite deck sections and pultruded profiles, plus plastics and combustibility tests.
GOST 33376-2015
Official source
Polymer Composite Deck Sections for Pedestrian and Highway Bridges and Overbridges — General Specifications
GOST 33344-2015
Official source
Constructive Pultruded Profiles from Polymer Composites — General Specifications
GOST 11262-2017
Official source
Plastics — Tensile Test Method
GOST 4648-2014
Official source
Plastics — Method of Static Bending Test
GOST 30244-94
Official source
Building Materials — Methods for Combustibility Tests
Brazil
3ABNT NBR 15708 pultruded GRP profiles, including the floor-grating part used in oil and gas.
ABNT NBR 15708-1:2014
Official source
Petroleum and Natural Gas Industries — Pultruded Profiles — Part 1: Materials, Test Methods and Dimensional Tolerances
ABNT NBR 15708-2:2015
Official source
Petroleum and Natural Gas Industries — Pultruded Profiles — Part 2: Guardrails
ABNT NBR 15708-3:2022
Official source
Petroleum and Natural Gas Industries — Pultruded Profiles — Part 3: Floor Grating
South Africa
3SANS structural actions and fire protection for buildings.
SANS 10160-1:2011
Official source
Basis of Structural Design and Actions for Buildings and Industrial Structures — Part 1: Basis of Structural Design
SANS 10160-2:2011
Official source
Basis of Structural Design and Actions for Buildings and Industrial Structures — Part 2: Self-Weight and Imposed Loads
SANS 10400-T:2024 (Ed 5)
Official source
The Application of the National Building Regulations — Part T: Fire Protection
International standards
ISO test methods for fibre-reinforced composites and plastics, plus durability methods used across markets.
ISO 14125:1998/Amd 1:2011
Official source
Fibre-Reinforced Plastic Composites — Determination of Flexural Properties
ISO 14126:2023
Official source
Fibre-Reinforced Plastic Composites — Determination of Compressive Properties in the In-Plane Direction
ISO 14130:1997
Official source
Fibre-Reinforced Plastic Composites — Determination of Apparent Interlaminar Shear Strength by Short-Beam Method
ISO 527-4:2023
Official source
Plastics — Determination of Tensile Properties — Part 4: Test Conditions for Isotropic and Orthotropic Fibre-Reinforced Plastic Composites
ISO 178:2019
Official source
Plastics — Determination of Flexural Properties
ISO 75-2:2013
Official source
Plastics — Determination of Temperature of Deflection under Load — Part 2: Plastics and Ebonite
ISO 899-1:2017
Official source
Plastics — Determination of Creep Behaviour — Part 1: Tensile Creep
ISO 62:2008
Official source
Plastics — Determination of Water Absorption
ISO 9227:2022
Official source
Corrosion Tests in Artificial Atmospheres — Salt Spray Tests
ISO 14129:1997
Official source
Fibre-Reinforced Plastic Composites — Determination of the In-Plane Shear Stress/Shear Strain Response, Including the In-Plane Shear Modulus and Strength by the ±45° Tension Test Method
Structural design
Load tables, design values and deflection limits used by the calculator.
GB/T 31539-2015
Official source
Pultruded Profiles of Fiber Reinforced Polymer Composites for Structural Use
Classification, specifications, mechanical performance requirements and test methods for pultruded FRP structural profiles; used to check the profile properties behind pultruded grating load tables.
ANSI/ACMA/FGMC FG01-17
Official source
FRP Composites Grating Manual for Pultruded and Molded Grating and Stair Treads
Load tables, standard specifications and standard practice for molded and pultruded grating and stair treads. 2nd Edition, 2019; current designation FG01-17-2025.
GB 50608-2020
Official source
Technical Standard for Engineering Application of Fiber Reinforced Polymer Composites
Design values and ultimate- and serviceability-limit state checks for FRP members; the main Chinese national standard for structural FRP design.
GB 50009-2012
Official source
Load Code for the Design of Building Structures
Characteristic floor live loads, maintenance loads and load combinations; used to establish design loads for grating platforms.
GB 50017-2017
Official source
Standard for Design of Steel Structures
Deflection limits and calculation rules for flexural members; used as a reference where no FRP-specific deflection limit is given.
EN 13706-1/-2/-3:2002
Official source
Specification for Pultruded Profiles - Parts 1 to 3: Designation, Test Methods and Specific Requirements
European specification for pultruded FRP profiles: designation (Part 1), test methods (Part 2) and specific requirements by profile type (Part 3).
ASTM D638-22
Official source
Standard Test Method for Tensile Properties of Plastics
Tensile strength, modulus and elongation of plastics; the base test method behind the tensile values quoted for grating profiles and resin systems.
ASTM D790-25
Official source
Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
Flexural strength and flexural modulus by three-point loading; the test behind the modulus used in grating deflection calculations.
Marine and offshore
IMO fire-test procedures, FRP fire-safety guidelines, coast-guard requirements and classification-society rules for ship and offshore grating.
ASTM F3059-24
Official source
Standard Specification for Fiber-Reinforced Polymer (FRP) Gratings Used in Marine Construction and Shipbuilding
The dedicated ASTM specification for FRP grating in marine construction and shipbuilding: material, fabrication, mechanical performance and fire-test requirements.
IMO FTP Code 2010 (MSC.307(88))
Public download
International Code for Application of Fire Test Procedures, 2010 (2010 FTP Code)
IMO mandatory fire-test code adopted by resolution MSC.307(88). Parts 1, 2 and 5 cover non-combustibility, smoke and toxicity, and surface flammability - the tests used to qualify FRP grating as a surface material on ships.
IMO MSC.1/Circ.1574/Rev.1
Public download
Guidelines for the Application of Fibre Reinforced Plastic (FRP) Elements within Ship Structures: Fire Safety Issues
IMO circular giving the fire-safety route for FRP elements in ship structures: equivalent SOLAS compliance, FTP Code testing and documentation for type approval.
IACS UI SC253
Public download
IACS Unified Interpretation SC253 - Application of MSC.1/Circ.1574 to FRP Elements
IACS unified interpretation telling classification societies how to apply the IMO FRP fire-safety guidelines when reviewing scantlings and type approval.
USCG 46 CFR 164.009
Public download
Noncombustible Materials - US Coast Guard Fire Test Requirements
US Coast Guard acceptance requirements for non-combustible materials under 46 CFR Subchapter Q, including the test procedure used for approval.
USCG NVIC 9-97 CH-1
Official source
NVIC 9-97 Change 1 - Fire Test Requirements for FRP Gratings
US Coast Guard guidance on the fire-test and type approval requirements for fibre-reinforced plastic gratings installed on inspected vessels.
ABS Rules Part 3 (2025)
Public download
ABS Rules for Building and Classing Marine Vessels - Part 3: Materials and Welding
ABS rules for materials and welding, including the acceptance route for FRP components and fire-resisting surface materials on ABS-classed vessels.
CCS 钢质海船入级规范 (2024)
Public download
CCS Rules for Classification of Sea-Going Steel Ships (2024)
China Classification Society rules for sea-going steel ships, including materials, fire protection and the approval of FRP components for CCS-classed vessels.
MED 2014/90/EU
Public download
Marine Equipment Directive 2014/90/EU
EU directive on marine equipment: wheel-mark, conformity assessment and the implementing specifications that reference the FTP Code for fire-resisting products placed on EU-flagged ships.
ISO 5658-2:2006
Official source
Reaction to Fire Tests - Spread of Flame - Part 2: Lateral Spread on Building and Transport Products in Vertical Position
Lateral flame-spread test on vertically mounted products; the test method behind FTP Code Part 5 and the critical heat flux used to qualify ship surface materials.
ISO 5659-2:2017
Official source
Plastics - Smoke Generation - Part 2: Determination of Optical Density by a Single-Chamber Test
Single-chamber smoke-density test; the method used by FTP Code Part 2 to measure smoke and toxicity from surface materials, including FRP grating.
ISO 1182:2020
Official source
Reaction to Fire Tests for Products - Non-Combustibility Test
Furnace test for non-combustibility; used by FTP Code Part 1 and referenced where a material must qualify as non-combustible.
ISO 1716:2018
Official source
Reaction to Fire Tests for Products - Determination of the Gross Heat of Combustion (Calorific Value)
Bomb-calorimeter determination of gross heat of combustion; the second test in FTP Code Part 1, used with ISO 1182 for non-combustibility assessment.
DNV-RU-HSLC Pt.3 Ch.4
Official source
DNV Rules for Classification: High Speed and Light Craft - Part 3, Chapter 4: Hull Structural Design, Fibre Composite and Sandwich Constructions
DNV class rule for FRP hulls, laminates and sandwich panels: material properties, scantling and strength checks. Fire performance of composite structures and surface materials is governed by SOLAS II-2 and the FTP Code as applied by DNV class rules, the route used to qualify FRP grating on DNV-classed craft.
LR SSC Part 8 (2022)
Official source
Lloyd's Register Rules and Regulations for the Classification of Special Service Craft - Part 8: Hull Construction in Composite
LR rules for composite hull construction, laminate materials and workshop approval. Composite structures and surface materials must meet the fire-safety requirements of SOLAS II-2 and the FTP Code, the route applied to FRP grating and walkway panels on LR-classed craft.
BV NR546 (2022)
Public download
Bureau Veritas NR546 - Hull in Composite, Plywood and High Density Polyethylene Materials
BV rule note for composite hulls: materials, laminate design, scantlings and construction survey. Fire requirements for composite structures refer to SOLAS II-2 and FTP Code testing, covering FRP grating used as a deck or walkway surface on BV-classed vessels.
ClassNK Fibreglass Ships (2025)
Official source
ClassNK Rules and Guidance for the Survey and Construction of Ships of Fibreglass Reinforced Plastics (2025)
ClassNK rules for FRP ships: materials, laminate scantlings, structural details and fire protection. Fire requirements follow SOLAS II-2 and the FTP Code, including surface flammability and smoke tests for FRP grating and other exposed composite surfaces.
KR FRP Ships (2020)
Public download
Korean Register Rules and Guidance for the Classification of FRP Ships (2020)
KR rules for FRP ships covering materials, laminate design, scantlings and fire safety. Fire requirements reference SOLAS II-2 and FTP Code test methods for surface materials, applicable to FRP grating on KR-classed vessels.
Flame retardancy
Burning-behaviour classification and surface flame-spread test methods.
GB 8624-2025
Official source
Classification for Burning Behavior of Building Materials and Products
Classifies building materials and products as A, B1, B2 or B3 by burning behaviour; used to specify and verify the flame-retardant grade of FRP grating. Replaces GB 8624-2012.
EN 13501-1:2018
Official source
Fire Classification of Construction Products and Building Elements - Part 1: Classification Using Data from Reaction to Fire Tests
European reaction-to-fire classes A1 to F, including the additional s1-s3 smoke and d0-d2 droplet classes; the classification framework behind CE marking of FRP grating in the EU.
EN 13823:2020+A1:2022
Official source
Reaction to Fire Tests for Building Products - Building Products Excluding Floorings Exposed to the Thermal Attack by a Single Burning Item
Single Burning Item (SBI) test producing the heat release, lateral flame spread and smoke growth rates used for EN 13501-1 classes B to D.
ASTM E84-26a
Official source
Standard Test Method for Surface Burning Characteristics of Building Materials
Surface burning test measuring flame spread and smoke developed indexes; the North American basis for specifying Class A or Class B FRP grating in tunnels, platforms and buildings.
ASTM E162-25a
Official source
Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
Radiant-panel test producing the flame spread index used in marine and rail surface-material approvals, including IMO FTP Code Part 5 correlations.
ASTM E662-21ae1
Official source
Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
Smoke-chamber test for specific optical density under flaming and non-flaming conditions; used to compare smoke output of FRP grating resin systems.
ISO 4589-2:2017
Official source
Plastics - Determination of Burning Behaviour by Oxygen Index - Part 2: Ambient-Temperature Test
Oxygen index test giving the minimum oxygen concentration that sustains combustion; a quick screening measure of the flame retardancy of grating resins.
UV resistance
Laboratory UV exposure methods for comparing resin systems and surface veils.
GB/T 16422.3-2022
Official source
Plastics - Methods of Exposure to Laboratory Light Sources - Part 3: Fluorescent UV Lamps
Laboratory light-exposure method using fluorescent UV lamps, corresponding to ISO 4892-3; used to compare the UV resistance of grating resin systems and surface veils.
ISO 4892-2:2013
Official source
Plastics - Methods of Exposure to Laboratory Light Sources - Part 2: Xenon-Arc Lamps
Xenon-arc exposure method that reproduces the full solar spectrum; used for colour retention and surface quality of FRP grating in outdoor installations.
ASTM G154-23
Official source
Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials
Operating practice for fluorescent UV lamp apparatus used to expose non-metallic materials; defines UV cycles, condensation and irradiance control for accelerated weathering of FRP grating.
ASTM G155-25
Official source
Standard Practice for Operating Xenon Arc Lamp Apparatus for Exposure of Nonmetallic Materials
Operating practice for xenon-arc apparatus used to expose non-metallic materials; defines irradiance, filters, humidity and test cycles for accelerated weathering of grating.
Ageing resistance
Heat-ageing methods for comparing property retention after long-term exposure.
GB/T 7141-2008
Official source
Plastics - Methods of Accelerated Ageing Test by Heat
Hot-air accelerated ageing method for plastics; used to compare the retention of flexural strength and modulus of grating resin systems after long-term heat exposure.
ISO 2578:1993
Official source
Plastics - Determination of Time-Temperature Limits After Prolonged Exposure to Heat
Method for deriving time-temperature limits from accelerated heat-ageing data; used to estimate the service life of grating under continuous heat.
ASTM D3045-18(2026)
Official source
Standard Practice for Heat Aging of Plastics Without Load
Practice for heat ageing of plastics without load; provides the exposure and evaluation framework for comparing FRP grating formulations before mechanical retesting.
ASTM D2990-17(2025)
Official source
Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics
Creep and creep-rupture test methods; used to check long-term deflection of grating under sustained load, which the short-term calculator does not include.
Heavy metals
Heavy-metal limits and migration tests for furniture, playground and contact applications.
GB 18584-2024
Official source
Limits of Harmful Substances in Furniture
Limits and test methods for harmful substances in furniture, including lead, cadmium, mercury, chromium and other heavy metals; relevant to FRP grating used in laboratory furniture and workspaces. Replaces GB 18584-2001 and GB 28481-2012; effective 2025-07-01.
GB 6675.4-2025
Official source
Safety of Toys - Part 4: Migration of Certain Elements
Chinese migration limits and test methods for antimony, arsenic, barium, cadmium, chromium, lead, mercury and selenium; applied to grating in playground and recreational equipment.
EN 71-3:2019+A2:2024
Official source
Safety of Toys - Part 3: Migration of Certain Elements
Migration limits and test methods for 19 elements, including lead, cadmium, mercury and chromium(VI), from toy materials; applied to grating in playgrounds and recreational equipment where toy-safety limits are specified.
REACH (EC) 1907/2006
Public download
REACH Regulation (EC) No 1907/2006 - Consolidated Text
EU chemicals regulation: SVHC candidate list, restrictions in Annex XVII and declaration duties for articles, including heavy-metal pigments and stabilisers in FRP grating.
Food contact
Food-contact material regulations, migration limits and authorised substances.
GB 4806.7-2023
Official source
National Food Safety Standard - Food Contact Use Materials and Articles - Plastics and Articles Thereof
National food safety standard for plastic materials and articles in contact with food: raw-material requirements, overall and specific migration limits; applies to FRP grating in food processing and handling areas. Published with NHC Announcement No. 6 of 2023, effective 2024-09-06.
GB 4806.1-2016
Public download
National Food Safety Standard - General Safety Requirements for Food Contact Materials and Articles
General safety standard for all food-contact materials: raw-material requirements, migration limits, labelling and traceability. A revision is in public consultation; confirm the edition required by your market.
GB 9685-2016/XG1-2025
Public download
National Food Safety Standard - Standard for Uses of Additives in Food Contact Materials and Articles, including Amendment No. 1 (2025)
Positive list of additives for food-contact materials with maximum levels, specific migration limits and usage notes; includes the 2025 Amendment No. 1 and the entries for unsaturated polyester resins.
FDA 21 CFR 177.2420
Public download
Polyester Resins, Cross-Linked
US FDA indirect food additive regulation for cross-linked polyester resins; specifies permitted reactants and extraction limits for unsaturated polyester resins used in repeated-use food-contact articles.
FDA 21 CFR 175.300
Public download
Resinous and Polymeric Coatings
US FDA indirect food additive regulation for resinous and polymeric coatings; relevant when a grating surface or coating is part of a food-contact article.
EU 10/2011
Public download
Plastic Materials and Articles Intended to Come into Contact with Food
EU framework regulation for plastic materials and articles in contact with food: Union list of authorised substances, overall and specific migration limits, and compliance documentation. Consolidated text.
NSF/ANSI 51-2025
Official source
Food Equipment Materials
North American standard for materials, coatings and adhesives used in food equipment; the reference behind NSF/ANSI 51 certification of FRP grating in food processing and commercial kitchens.
No documents match the selected filters.
FAQ · Downloads and use
Frequently asked questions about the standards and downloads
Which reference documents are available?
The library covers 12 countries and regions — China, the United States, Europe, the United Kingdom, Japan, Korea, India, Australia and New Zealand, Canada, Russia and CIS, Brazil and South Africa — plus international ISO standards. It is grouped into nine topics: national and regional standards, international standards, structural design, marine and offshore, flame retardancy, UV resistance, heat ageing, heavy metals and food contact. Not every country publishes a dedicated FRP grating product standard; where none exists, the library lists the access-platform, imposed-load, fire or FRP material standards a grating specification is checked against.
What do public download and official source mean?
A public download opens a free full text published by the standards body or regulator, such as the eCFR or EUR-Lex. An official source opens the publisher page where the standard can be read or purchased, such as openstd.samr.gov.cn or the ASTM store. A licensed PDF is a file Niteck has been authorised to distribute and is available after signing in.
Why do I need to sign in to download a PDF?
Licensed PDF downloads are limited to signed-in visitors so we can track usage and protect the files from hotlinking. Public and official links never require an account. Creating an account is free.
How are downloads tracked?
Each licensed PDF card shows how many times the file has been downloaded. The number is informational and there is no annual cap. Download links carry a random token that expires after 30 minutes, and the download itself requires a signed-in account, so the PDFs cannot be hotlinked.
Are these the official standard editions?
The PDF or link is the edition named on each card. Standards are revised from time to time; always confirm the edition required by your project contract or design documents. Where a standard cannot be redistributed, the card links to the publisher instead of offering a file.
Can I request a document that is not listed?
Yes. Use the quote form on the calculator page or email our engineering team with the standard number and edition you need, and we will confirm availability.
Sizing and quotation
Need a sizing check for your span and load?
Open the load calculator, select grating types, enter your span and load, and get a deflection and safety result you can send to our engineers as an enquiry.